[. . . ] ????????????????????????????????? Thank you for purchasing the Carrying Holder YAMAHA MARCHING BELLS / XYLOPHONE. ?????? CAUTION Securely tighten all screws after adjusting the instrument's position. [. . . ] 2 ?????????????Frame Mounting Adjustment ??????????????????????????????????????????To adjust the frame height to a comfortable playing position, remove the frame mounting screws and nuts using the hexagonal spanner and Allen wrench provided. After adjustment securely tighten the screws and nuts using the hexagonal spanner and Allen wrench. Use a hex wrench to loosen the four screws A on the carrier frame so that the brackets can slide. Set the carrier frame on the instrument, as shown in the illustration at the below, and slide the brackets on the carrier frame so that they align with the carrier mounting plates on the bottom of the instrument. Use the four fixing bolts B on the brackets to attach the carrier frame to the instrument. ?If you are having trouble reattaching the carrier frame after it has been removed, go through the same procedure as described above. Attaching the instrument to the holder is best done on a stand or table. Frame ???????ASSEMBLY PROCEDURE 1 ???????????????Carrying Holder Setup ??????????????????????????????????????????Attach the upper part of the holder to the lower part in a suitable position, and tighten the wing nuts securely. [. . . ] To adjust for a comfortable playing height, loosen the arm screws D and raise or lower the arms as required. ) After adjustment, securely tighten the screws using the Allen wrench provided. [. . . ]